Floor Warming System

Houzz

TEC™ Skill Set™ In-Floor Heat Heating Panel System is designed for easy installation by both contractors an experienced DIYers. The In-Floor Heat Mat evenly distributes radiant heat creating uniform warmth under tile and stone floors in residential and commercial indoor areas. TEC™ Skill Set™ In-Floor Heat Heating Panel System is a low density heating device. It is recommended to cover the majority of open floor space to create optimal comfort. The heating mat draws 13 watts per square foot, providing even heating through each section. The floor temperature is controlled by a TEC™ Thermostat (sold separately). View our installation Quick Reference Guide.

Key Benefits & Features

  • Kit includes mat, attached wire harness(es), edge sealing tape, and scissors
  • Three kits are available in 15, 26 or 50 square feet mats
  • Cut to fit desired shape and size
  • No embedded wires, no coils
  • UL approved
  • Uniform warmth under stone and tile
  • Extremely thin mat and less floor build up – only 1/64” thick
  • Limited Lifetime Systems Warranty when installed using TEC® Skill Set™ Grout & Mortar products 
Hide reviews

Rate this item

*Name
*City
*Email (will not be published)

Terms and conditions

Packaging

Description

15 sq. ft. In-Floor Heating Panel System Includes:

  • (1) 15 sq. ft. (40”W x 54”L) TEC™ Skill Set™ In-Floor Heat Mat
     
  • (1) Attached wire harness
     
  • Edge sealing tape
     
  • Scissors
     
  • TEC™ Thermostat with sensor sold separately

     

26 sq. ft. In-Floor Heating Panel System Includes: 

  • (1) 26 sq. ft. (40”W x 94”L) TEC™ Skill Set™ In-Floor Heat Mat
     
  • (1) Attached wire harness
     
  • Edge sealing tape
     
  • Scissors
     
  • TEC™ Thermostat with sensor sold separately

     

 

50 sq. ft. In-Floor Heating Panel System Includes:

  • (1) 50 sq. ft. (40”W x 180”L) TEC™ Skill Set™ In-Floor Heat Mat
     
  • (2) Attached wire harnesses
     
  • Edge sealing tape
     
  • Scissors
     
  • TEC™ Thermostat with sensor sold separately

Application: Indoor floor heat

Listings: UL listed; Certified UL LLC and UL standard 1683

Electric:

  • Controls: TEC™ Skill Set™ In-Floor Heat must be controlled by a direct voltage floor heat sensing thermostat.
     
  • Voltage: 120 VAC, 50/60hz
     
  • Watts: 13 watts/sq.ft. (42 Btu/sq. ft.)
     
  • Maximum circuit load: 15 A
     
  • Maximum circuit overload protection: 20 A breaker GFCI (Ground Fault Circuit Interrupter) required for each circuit (included in the thermostat control)
     
  • Maximum mat size: 120 sq. ft.

Heat Mat:

  • Maximum bend radius: Not to exceed 90° angle. Do not crease/fold mat.
     
  • Maximum exposure temperature: (Continuous and storage) 150°F (65.5°C)
     
  • Minimum installation temperature: 50°F (10°C)

Technical assistance information is available by calling the Technical Service Helpline.
Toll Free: 800-832-9023